DIY Detail 1 Year Graphene Ceramic Coating

DIY Detail 1 Year Ceramic Graphene Coating is a TEOS-based ceramic coating that’s easy to apply, adds gloss, slickness, and long-term protection. The TEOS (Tetraethyl Orthosilicate) formulation helps reduce clogging and provides exceptional fracturing resistance, making this coating reliable and user-friendly for both enthusiasts and professionals.

The DIY Detail 1 Year Graphene Coating is 120mL or 4oz in size. And gives you the freedom to apply the coating in a way that is best for you. You can even apply to multiple panels or the full vehicle and come back to level. This is dependent on dust, humidity and temperature.

Application can be done using either the included sprayers or dropper insert, the choice is yours. The coating can be used with our Foam Wax/Sealant/Coating applicator or a microfiber towel.

Applicator not included

Where It Can Be Used

DIY Detail 1 Year Ceramic Graphene Coating is safe and effective on a wide range of exterior surfaces, including:

• Automotive paint
• PPF and vinyl (gloss and matte)
• Glass
• Trim and chrome
• Wheels

Key Benefits

• 1 year ceramic graphene protection
• TEOS-based formula for improved durability and resistance to clogging
• Adds noticeable gloss and slickness
• Multiple application methods supported
• Compatible with paint protection film and vinyl wraps

Application Instructions

Surface Prep

• Start with a clean, dry, and fully decontaminated surface.
• Surface temperature must be above 40°F (5°C) and remain there for at least 1 hour.

For best results, prep the surface using DIY Detail Panel Prep or C6 Ceramics Adhesion Promoter Polish (APP).

Spray / Towel Method

• Spray several times onto a short-nap towel (Level 1) and spread over the surface to be protected.
• For additional panels, spray 3–4 times onto the towel.
• Allow the coating to flash, then level using a Freebird 400 towel.

Spray / Applicator Method

• Spray several times onto a foam coating applicator and spread evenly over the surface.
• For additional panels, apply 3–4 sprays to the applicator.
• Allow to flash, then level with a Freebird 400 towel.

Dropper Method

• Remove the sprayer and insert the dropper, ensuring it is seated properly.
• Apply 8–10 drops to the applicator and spread over the surface.
• For additional panels, apply 2–3 drops.
• Allow to flash, then level with a Freebird 400 towel.

Post-Application Care

• Vehicle can return to service after 1 hour
• Wash using DIY Detail Rinse Less Wash after 3 days
• Full cure achieved in 7 days

After application, remove the sprayer and spray back into the bottle to clear remaining coating. Clean the sprayer using DIY Detail Rinse Less Wash or DIY Detail Panel Prep.